The nutrimatic machine / GSM / Net codes (e)

Codes in the GSM-net

Category:

Character description:

**	set and program (register)
*	activate
##	off and clear (deregister)
#	deactivate
*#	status check
@	SEND- or green receiver-key

Standard-codes for call forwarding/diversion:

Setting:	*or FUNCTION * DestNo {* SERVICE (* RING)} # SEND
Clearing:	##or# FUNCTION {* SERVICE} # SEND
Status:	# FUNCTION { SERVICE} # SEND

You must define FUNCTION, if you do not define SERVICE CODE
or RING the network uses it's standard worth !!

DestNo: Number to which you want to divert calls.

Call forwarding/diversion

FUNCTION	Description
##002#@	DEREGISTER all call diversions
#002#@	DEACTIVATE all call diversions
*004DestNo#@	REGISTER all configured call diversions (61, 62, 67) to DestinationNumber
##004#@	DEREGISTER all configured call diversions (61, 62, 67)
#004#@	DEACTIVATE all configured call diversions (61, 62, 67)
21	Divert ALL calls
61	Divert calls on NO ANSWER
62	Divert calls on NOT REACHABLE
67	Divert calls on BUSY

RING: **61*DestNo**10#@

Changing number of rings before diverting on no answer.
No "10" is the number of the seconds of ringing,
min. 5 sec., max. 30 sec. (5-second-steps) !
On some network providers you can also set the count
of ringing tones up to diversion (1 ... 6) !
You must set two "*" in front of the RING count
or you have to set SERVICE CODE, too !!

Caution! Use ##61#@ to reset the time !!

On some network providers you must set SERVICE CODE !

SERVICE CODE

Phone service	Description
10	All types of phone services (Speech, Fax, SMS, Data, ...)
11	Speech services (only phone calls)
12	Data services
13	Fax
14	Datex-J
15	Teletex
16	Short messages (SMS)
18	All data services but SMS
19	All phone services but SMS
Carrier service	Description
20	All services
21	All asynchronous services
22	All synchronous services
23	3.1kHz services
24	Synchronous point-to-point connections incl. PADs all synchronous data services
25	Asynchronous point-to-point connections incl. PADs all asynchronous data services
26	Data packet sending incl. PADs all synchronous data packet services
27	Services with PAD-share
29	Digital connections with 12 kbps

At the time in the german net only the service codes 11, 13 and 25 are working !

back to Call barring

Safety

Function	Description
*03330oldPWnewPW*newPW#@	Changing the password for call barring (net-password)
*04oldPINnewPINnewPIN#@	Changing the PIN code (card)
*042oldPIN2newPIN2newPIN2#@	Changing the PIN2 code (card)
*05PUKnewPINnewPIN#@	Unlock PIN (card) (after 3x wrong trials)
*052PUK2newPIN2newPIN2#@	Unlock PIN2 (card) (after 3x wrong trials)
*#06#	Show IMEI number (=serial number of the mobile)

Standard-codes for call barring:

Setting:	* FUNCTION * PASSWORD (* SERVICE) # SEND
Clearing:	# FUNCTION * PASSWORD (* SERVICE) # SEND
status check:	# FUNCTION ( SERVICE) # SEND

You must define FUNCTION and PASSWORD, if you do not define
SERVICE CODE the network uses it's standard worth !!

SERVICE CODE: see above.

Call barring

FUNCTION	Description
#330#@	DEACTIVATE all call barrings
33	Barr all outgoing calls
331	Barr all outgoing international calls
332	Barr all outgoing international calls but home network
35	Barr all incoming calls
351	Barr all incoming calls when roaming

Call waiting

Function	Description
*43#@	Activate call waiting
#43#@	Deactivate call waiting
*#43#@	Status call waiting

Number presentation

Following does only work if CLIP and CLIR are set (ask your service provider).

CLIP: Presentation of the number of the incoming call

CLIR: Presentation of your own number at your call partner
(if he can see the number (CLIP))

COLP: Presentation of the number under which I reached the other one
(not his number if he has turned on a calling divertation!)

COLR: Presentation of the number under which the caller has reached me
(not my number if I have turned on a calling divertation!)

Function	Description
*30#@	Presentation of the number of the incoming call (CLIP)
#30#@	No presentation of the number of the incoming call (CLIP)
*#30#@	CLIP status
*31#DestNo@	Your number will be send for the next one call (CLIR)
#31#DestNo@	Your number will not be send for the next one call (CLIR)
*#31#@	CLIR status
*76#@	COLP activate
#76#@	COLP deactivate
*#76#@	COLP status
*77#@	COLR activate
#77#@	COLR deactivate
*#77#@	COLR status

The codes 30, 76 and 77 are not changeable from the end user in the german
networks.

After each code which takes effect in the net (all codes without
*#06# =IMEI(serial)nubmer) you have to press the green receiver-key.
Without this a change takes no effect! (here symbolized with the "@")!!

Write your numbers in memory and for call divertion as shown in the following example.
It protects you from problems. The +49 will be sorted out in your own country automatically):

+xy abc 0123456, where:

+xy international area code
(in Germany e.g. +49 instead of 0049)(the "+" is part of it!)

abc area code without zero
(for Dortmund e.g. 231 instead of 0231)

0123456 normal local-number of your call partner
is.
This all works in Germany. For your own country ask your local service provider.

Number of accesses since April `01 counter

back to the AEG/GSM page

back to my homepage

© by Dirk Salva